Joint API

The attributes in JointJS define how the graphics elements are to be rendered inside of the element and link views. All the standard SVG styling properties are available (both kebab-case and camelCase styles). In addition JointJS defines new so-called "special" attributes and allows programmers to define their own. Here is the list of all built-in attributes.

Move the subelement to the point at a given distance along the connection path but do not auto-orient it according to the path's gradient. Use a positive number to define the distance from the source of the link and a negative number from the target of the link. It is valid only within the LinkView context.

link.attr('rectSelector', { atConnectionLengthIgnoreGradient: 30, width: 10, height: 10, fill: 'red' });

alias: atConnectionLength

Move and auto-orient the subelement to the point at a given distance along the connection path. Use a positive number to define the distance from the source of the link and a negative number from the target of the link. It is valid only within the LinkView context.

link.attr('rectSelector', { atConnectionLength: 30, width: 10, height: 10, fill: 'red' });
link.attr('rectSelector', { atConnectionLengthKeepGradient: 30, width: 10, height: 10, fill: 'red' });

Move the subelement to the point at a given ratio of the connection total length but do not auto-orient it according to the path's gradient. It accepts a number in the [0,1] range. It is valid only within the LinkView context.

link.attr('rectSelector', { atConnectionRatioKeepGradient: .5, width: 10, height: 10, fill: 'red' });

alias: atConnectionRatio

Move and auto-orient the subelement to the point at a given ratio of the connection total length. It accepts a number in the [0,1] range. It is valid only within the LinkView context.

link.attr('rectSelector', { atConnectionRatio: .5, width: 10, height: 10, fill: 'red' });
link.attr('rectSelector', { atConnectionRatioKeepGradient: .5, width: 10, height: 10, fill: 'red' });

Set the 'd' attribute based on the current link connection (the result of the link`s connector). It's valid only for SVGPathElement within the LinkView context.

link.attr('pathSelector', { connection: true, stroke: 'red', fill: 'none' });

The event attribute makes the selected node and its descendants trigger an arbitrary event when clicked (mousedown/touchstart). This event is triggered on the view itself and the paper. The paper handler is called with the signature cellView, evt, x, y, while the cell view handler is called only with evt, x, y.

element.attr({
  image: {
    // pointerdown on the image SVG node will trigger the `element:delete` event
    event: 'element:delete',
    xlinkHref: 'trash.png'
    width: 20,
    height: 20
  }
});
// Binding handler to the event
paper.on('element:delete', function(elementView, evt) {
  // Stop any further actions with the element view e.g. dragging
  evt.stopPropagation();
  if (confirm('Are you sure you want to delete this element?')) {
      elementView.model.remove();
  }
});

The fill attribute becomes a special attribute only in case it's defined as an object, instead of the usual SVG syntax (e.g. "#ffaabb"). If it's defined as an object, it is assumed to be a gradient definition and must have the form defined by the defineGradient() paper method.

element.attr('rect/fill', {
    type: 'linearGradient',
    stops: [
        { offset: '0%', color: '#E67E22' },
        { offset: '20%', color: '#D35400' },
        { offset: '40%', color: '#E74C3C' },
        { offset: '60%', color: '#C0392B' },
        { offset: '80%', color: '#F39C12' }
    ]
});

The filter attribute becomes a special attribute only in case it's defined as an object, instead of the usual SVG syntax (e.g. "url(#myfilter)"). If it's defined as an object, it must have the form defined by by the filterGradient() paper method.

element.attr('rect/filter', {
    name: 'dropShadow',
    args: {
        dx: 2,
        dy: 2,
        blur: 3
    }
});

When set to true, the subelement can become a source/target of a link during link reconnection. Useful for so called 'ports'.

An object containing at least an id property. This property uniquely identifies the port. If a link gets connected to a magnet that has also a port object defined, the id property of the port object will be copied to the port property of the source/target of the link.

CSS selector pointing to an element that is used as a reference for relative positioning attributes.

Set cx attribute of the subelement relatively to the width of the element referenced to by the selector in ref attribute. If the value is in the [0, 1] interval (or expressed in percentages, e.g. '80%'), the cx of the subelement will be set as a percentage of the width of the referenced element. If the value is <0 or >1, the height of the subelement will be smaller/bigger than the width of the referenced element by the amount specified. Note that this makes sense only for SVG elements that support rx and ry attributes, such as <ellipse>.

Set cy attribute of the subelement relatively to the height of the element referenced to by the selector in ref attribute. If the value is in the [0, 1] interval (or expressed in percentages, e.g. '80%'), the cy of the subelement will be set as a percentage of the height of the referenced element. If the value is <0 or >1, the height of the subelement will be smaller/bigger than the height of the referenced element by the amount specified. Note that this makes sense only for SVG elements that support rx and ry attributes, such as <ellipse>.

Set d attribute of the <path> subelement relatively to the dimensions and position of the element referenced by the selector in the ref attribute. The refD path data is scaled so that the path's dimensions match the reference element's dimensions, and translated so that the path's origin matches the origin of the reference element.

The original path data offset is preserved. This means that if the top-left corner of the refD bounding box does not lie at 0,0, the gap between the path and origin is preserved in the rendered shape, as well.

var Path = joint.dia.Element.define('examples.Path', {
    attrs: {
        path: {
            refDKeepOffset: 'M 10 10 30 10 30 30 z', // path offset is 10,10
            fill: 'red',
            stroke: 'black'
        }
    }
}, {
    markup: 'path'
});

var p = (new Path()).resize(40, 40).addTo(graph);
// the rendered path's `d` attribute will be 'M 10 10 50 10 50 50 z'
// can be obtained by `p.findView(paper).vel.findOne('path').attr('d');`

alias: refD

Set d attribute of the <path> subelement relatively to the dimensions and position of the element referenced by the selector in the ref attribute. The refD path data is scaled so that the path's dimensions match the reference element's dimensions, and translated so that the path's origin matches the origin of the reference element.

The original path data offset is not preserved. This means that if the top-left corner of the refD bounding box does not lie at 0,0, the path is translated so that this gap disappears. The rendered path then fits perfectly into the reference element's bounding box.

var Path = joint.dia.Element.define('examples.Path', {
    attrs: {
        path: {
            refDResetOffset: 'M 10 10 30 10 30 30 z', // path offset of 10,10 will be discarded
            fill: 'red',
            stroke: 'black'
        }
    }
}, {
    markup: 'path'
});

var p = (new Path()).resize(40, 40).addTo(graph);
// the rendered path's `d` attribute will be 'M 0 0 40 0 40 40 z'
// can be obtained by `p.findView(paper).vel.findOne('path').attr('d');`

alias: ref-dx

Make x-coordinate of the subelement relative to the right edge of the element referenced to by the selector in ref attribute.

Make y-coordinate of the subelement relative to the bottom edge of the element referenced to by the selector in ref attribute.

alias: ref-height

Set height of the subelement relatively to the height of the element referenced to by the selector in ref attribute. If the value is in the [0, 1] interval (or expressed in percentages, e.g. '80%'), the height of the subelement will be set as a percentage of the height of the referenced element. If the value is <0 or >1, the height of the subelement will be smaller/bigger than the height of the referenced element by the amount specified. Note that this makes sense only for SVG elements that support width and height attributes, such as <rect>.

Same as refHeight. Useful when one needs to resize an element absolutely and relatively at the same time. Note that all percentages are relative to 100% of the referenced height.

{ refHeight: 20, refHeight2: '-75%' } // resizes the element to 25% of the reference height (25% = 100% - 75%) plus extra 20 pixels

Set the points attribute of the <polygon> or <polyline> subelement relatively to the dimensions and position of the element referenced by the selector in the ref attribute. The refPoints are scaled so that the subelement's dimensions match the reference element's dimensions, and translated so that the their origin matches the origin of the reference element.

The original points offset is preserved. This means that if the top-left corner of the refPoints bounding box does not lie at 0,0, the gap between the points and origin is preserved in the rendered shape, as well.

var Polygon = joint.dia.Element.define('examples.Polygon', {
    attrs: {
        polygon: {
            refPoints: '10,10 30,10 30,30', // points offset is 10,10
            fill: 'red',
            stroke: 'black'
        }
    }
}, {
    markup: 'polygon'
});

var p = (new Polygon()).resize(40, 40).addTo(graph);
// the rendered polygon's `points` attribute will be '10,10 50,10 50,50'
// can be obtained by `p.findView(paper).vel.findOne('polygon').attr('points');`

alias: refPoints

Set the points attribute of the <polygon> or <polyline> subelement relatively to the dimensions and position of the element referenced by the selector in the ref attribute. The refPoints are scaled so that the subelement's dimensions match the reference element's dimensions, and translated so that the their origin matches the origin of the reference element.

The original points offset is not preserved. This means that if the top-left corner of the refPoints bounding box does not lie at 0,0, the subelement is translated so that this gap disappears. The rendered subelement then fits perfectly into the reference element's bounding box.

var Polygon = joint.dia.Element.define('examples.Polygon', {
    attrs: {
        polygon: {
            refPoints: '10,10 30,10 30,30', // points offset of 10,10 will be discarded
            fill: 'red',
            stroke: 'black'
        }
    }
}, {
    markup: 'polygon'
});

var p = (new Polygon()).resize(40, 40).addTo(graph);
// the rendered polygon's `points` attribute will be '0,0 40,0 40,40'
// can be obtained by `p.findView(paper).vel.findOne('polygon').attr('d');`

Set the r attribute of the subelement relatively to the circumscribed size (length of the diagonal of the bounding box) of the element referenced by the selector in the ref attribute. If the value is in the [0, 1] interval (or expressed in percentages, e.g. '80%'), the r of the subelement will be set as a percentage of the size of the referenced element. If the value is <0 or >1, the size of the subelement will be smaller/bigger than the size of the referenced element by the amount specified. Note that this makes sense only for SVG elements that support r attribute, such as <circle>.

alias: refR

Set the r attribute of the subelement relatively to the inscribed size (width or height of the bounding box, whichever is smaller) of the element referenced by the selector in the ref attribute. If the value is in the [0, 1] interval (or expressed in percentages, e.g. '80%'), the r of the subelement will be set as a percentage of the size of the referenced element. If the value is <0 or >1, the size of the subelement will be smaller/bigger than the size of the referenced element by the amount specified. Note that this makes sense only for SVG elements that support r attribute, such as <circle>.

Set rx attribute of the subelement relatively to the width of the element referenced to by the selector in ref attribute. If the value is in the [0, 1] interval (or expressed in percentages, e.g. '80%'), the rx of the subelement will be set as a percentage of the width of the referenced element. If the value is <0 or >1, the height of the subelement will be smaller/bigger than the width of the referenced element by the amount specified. Note that this makes sense only for SVG elements that support rx and ry attributes, such as <ellipse>.

Set ry attribute of the subelement relatively to the height of the element referenced to by the selector in ref attribute. If the value is in the [0, 1] interval (or expressed in percentages, e.g. '80%'), the ry of the subelement will be set as a percentage of the height of the referenced element. If the value is <0 or >1, the height of the subelement will be smaller/bigger than the height of the referenced element by the amount specified. Note that this makes sense only for SVG elements that support rx and ry attributes, such as <ellipse>.

alias: ref-width

Set width of the subelement relatively to the width of the element referenced to by the selector in ref attribute. If the value is in the [0, 1] interval (or expressed in percentages, e.g. '80%'), the width of the subelement will be set as a percentage of the width of the referenced element. If the value is <0 or >1, the width of the subelement will be smaller/bigger than the width of the referenced element by the amount specified. For example, 'ref-width': .75 sets the width of the subelement to 75% of the width of the referenced element. 'ref-width': 20 makes the width to be 20px less than the width of the referenced element. Note that this makes sense only for SVG elements that support width and height attributes, such as <rect>.

Same as refWidth. Useful when one needs to resize an element absolutely and relatively at the same time. Note that all percentages are relative to 100% of the referenced width.

{ refWidth: 20, refWidth2: '-75%' } // resizes the element to 25% of the reference width (25% = 100% - 75%) plus extra 20 pixels

alias: ref-x

Make x-coordinate of the subelement relative to the x-coordinate of the element referenced to by the selector in ref attribute. If ref-x is in the (0,1) interval (or expressed in percentages, e.g. '80%'), the offset is calculated from the fraction of the bounding box of the referenced element. Otherwise, it is an absolute value in pixels.

Same as refX. Useful when one needs to position an element absolutely and relatively at the same time.

{ refX: '50%', refX2: 20 } // moves the element by 50% of the referenced width plus extra 20 pixels.

alias: ref-y

Make y-coordinate of the subelement relative to the y-coordinate of the element referenced to by the selector in ref attribute. If ref-y is in the (0,1) interval (or expressed in percentages, e.g. '80%'), the offset is calculated from the fraction of the bounding box of the referenced element. Otherwise, it is an absolute value in pixels.

Same as refY. Useful when one needs to position an element absolutely and relatively at the same time.

{ refY: '50%', refY2: 20 } // moves the element by 50% of the referenced height plus extra 20 pixels.

If set to true, the subelement offset (the distance from x0 y0 to the most top-left point) will be reset to x0 y0.

element.attr({
  path: {
    // The path bbox for `d="M 10 10 20 20"` is x10 y10 w10 h10.
    d: 'M 10 10 20 20',
    // The path bbox will be changed to x0 y0 w10 h10.
    // This has same effect as passing path with `d="M 0 0 10 10"`
    resetOffset: true
  }
});

Valid for <path> subelements. It draws an SVG element at the beginning of a path. The element is automatically rotated based on the path direction. It's defined as an object with type property and any other visual attributes. The valid values for type are 'path', 'circle', 'ellipse', 'rect', 'polyline' and 'polygon'.

link.attr('.connection/sourceMarker', {
  type: 'circle', // SVG Circle
  fill: '#666',
  stroke: '#333',
  r: 5, // radius of the circle
  cx: 5 // move the centre of the circle 5 pixels from the end of the path
});

The stroke attribute becomes a special attribute only in case it's defined as an object. This has the exact same behaviour as the fill attribute.

An object containing CSS styles for a subelement.

Valid for <path> subelements. The same as sourceMarker but draws an SVG element at the end of the path. Note the coordinate system for drawing is rotated by 180 degrees for convenience (this allows to use the same marker for source and target and have them both face the connected elements).

Valid only for <text> subelements.

The text attribute contains the text that should be set on the subelement. If the provided string does not contain any newline characters ('\n'), the text is set directly as the content of the <text> subelement. Alternatively, if the provided string has multiple lines, each line becomes the content of a <tspan> child of the <text> subelement.

If you need the text to be automatically wrapped inside the <text> subelement, you should use the textWrap attribute instead. It can automatically add line breaks into the provided string as necessary, and mark them with newline characters.

Valid only for <text> subelements. textPath can be either a string or an object.

If it is a string, it specifies a path the text will be rendered along.

If it is an object, then it can contain a d property that specifies the path the text will be rendered along. Alternatively use selector property, which is useful for targeting a specific SVGPathElement within the shape. The option expects a string selector (CSS or JSONMarkup selector). Use startOffset property to control the text position on the path (e.g. '50%', 20). See the Vectorizer.text method for more details.

Valid only for <text/> subelements. The attribute is used to (top-, middle- or bottom-) align a text, relative to a point determined by reference to provided x, y, refX, refY, and similar attributes. See the Vectorizer.text method for more details.

Valid only for <text> subelements.

Similar to the text attribute, except the provided string is automatically wrapped to fit within the reference bounding box.

Expects an object with a text property and optional width and height, which can adjust the final size of the wrapped text. Negative values decrease the dimension (e.g. to add padding around the wrapped text); positive values increase the dimension. Percentage values are accepted as well.

If the text cannot fit into the bounding box as specified, the overflowing words are cut off. If the ellipsis option is provided, an ellipsis string is inserted before the cutoff. If no words can fit into the bounding box at all, no text is inserted. See util.breakText for more info.

textWrap: {
  text: 'lorem ipsum dolor sit amet consectetur adipiscing elit',
  width: -10, // reference width minus 10
  height: '50%', // half of the reference height
  ellipsis: true // could also be a custom string, e.g. '...!?'
}

Add the text-only description in form of a <title> element to the associated node. The title is not rendered as part of the graphics, but it's displayed as a tooltip.

element.attr('rect/title', 'Description of the rectangle');

Valid for <path> subelements. The same as sourceMarker but draws SVG elements at every vertex of the path.

alias: x-alignment

If set to 'middle', the subelement will be centered around its new x-coordinate.

alias: y-alignment

If set to 'middle', the subelement will be centered around its new y-coordinate.

The basic model for diagram cells. It's a Backbone model with a few additional properties and methods. Most importantly, every cell has a unique ID that is stored in the id property.

define(type [, defaultAttributes, prototypeProperties, staticProperties])

Helper to define a new Cell class or extend an existing one.

The type must be a unique identifier of the class, which determines the location of the class definition in the joint.shapes namespace (type is the path to the class definition delimited by dots: .). When creating an instance of the cell, attributes will be set to the value from the defaultAttributes, unless overridden by subclass or instance attributes.

// Define a new Ellipse class in `joint.shapes.examples` namespace
// Inherits from generic Element class
var Ellipse = joint.dia.Element.define('examples.Ellipse', {
    // default attributes
    markup: [{
        tagName: 'ellipse',
        selector: 'ellipse' // not necessary but faster
    ],
    attrs: {
        ellipse: {
            fill: 'white',
            stroke: 'black',
            strokeWidth: 4,
            refRx: .5,
            refRy: .5,
            refCx: .5,
            refCy: .5
        }
    }
});

// Instantiate an element
var ellipse = (new Ellipse()).position(100, 100).size(120, 50).addTo(graph);

// Define a new ColoredEllipse class
// Inherits from Ellipse
var ColoredEllipse = Ellipse.define('examples.ColoredEllipse', {
    // overridden Ellipse default attributes
    // other Ellipse attributes preserved
    attrs: {
        ellipse: {
            fill: 'lightgray'
        }
    }
}, {
    // prototype properties
    // accessible on `this.(...)` - as well as, more precisely, `this.prototype.(...)`
    // useful for custom methods that need access to this instance
    // shared by all instances of the class
    randomizeStrokeColor: function() {
        var randomColor = '#' + ('000000' + Math.floor(Math.random() * 16777215).toString(16)).slice(-6);
        return this.attr('ellipse/stroke', randomColor);
    }
}, {
    // static properties
    // accessible on `this.constructor.(...)`
    // useful for custom methods and constants that do not need an instance to operate
    // however, a new set of static properties is generated every time the constructor is called
    // (try to only use static properties if absolutely necessary)
    createRandom: function() {
        return (new ColoredEllipse()).randomizeStrokeColor();
    }
});

// Instantiate an element
var coloredEllipse = ColoredEllipse.createRandom().position(300, 100).size(120, 50).addTo(graph);

markup

Either an XML string or JSON markup specifying an array of JSON elements. Used as a template to build DOM Elements on the fly when the associated cellView is rendered.

XML String

A valid XML string that contains either a single tagName or XML that can be parsed with DOMParser.

markup: 'rect'
markup: '<rect class="rectangle"/>'
markup: '<rect><g><circle/><circle/></g>'

JSON Markup

JSON markup is defined recursively as an array of JSONElement, where JSONElement is a plain object with the following properties:

• tagName (string) (required) The type of element to be created.
• selector (string) A unique selector for targeting the element within the attr cell attribute.
• groupSelector (string | string[]) A selector for targeting multiple elements within the attr cell attribute. The group selector name must not be the same as an existing selector name.
• namespaceURI (string) The namespace URI of the element. It defaults to SVG namespace "http://www.w3.org/2000/svg".
• attributes (object with attributes name-value pairs) Attributes of the element.
• style (object with CSS property-value pairs) The style attribute of the element.
• className (string) The class attribute of the element.
• children (JSONMarkup) The children of the element.
• textContent (string) The text content of the element.

// single DOM element
markup: [{ tagName: 'rect' }]

// multiple DOM elements
markup: [{
    tagName: 'rect',
    selector: 'body'
}, {
    tagName: 'text',
    selector: 'label',
    attributes: {
        'stroke': 'none'
    }
}]

// nested DOM elements
markup: [{
    tagName: 'g',
    children: [{
        tagName: 'circle',
        selector: 'circle1',
        groupSelector: 'circles'
    }, {
        tagName: 'circle',
        selector: 'circle2',
        groupSelector: 'circles'
    }]
}]

Setting attributes with selectors

• selector is unique i.e. can target a single node only.
• selector takes precedence over groupSelector.
• groupSelector targeting n nodes takes precedence over groupSelector targeting m nodes for n < m. When n === m the order how the attributes are applied is unspecified.

In the example below, the circle with the selector circle1 is filled with "red" color. All the other circles are filled with "blue" color.

cell.attr({
    circle1: { fill: 'red' },
    circles: { fill: 'blue', stroke: 'black' }
});

The view for the joint.dia.Cell model. It inherits from Backbone.View and is responsible for:

• Rendering a cell inside of a paper
• Handling the cell's pointer events
• Provides various methods for working with the cell (visually)

To find the view associated with a specific cell (model), use the findViewByModel method of the paper. For example:

var cellView = paper.findViewByModel(cell);

The model for diagram elements. It inherits from joint.dia.Cell with a few additional properties and methods specific to elements. These properties can be put into three groups:

Geometry

Coordinates of an element are stored in the position property that is an object with x and y keys. position can be accessed or set directly using the regular Backbone set()/get() methods or through the translate method.

Rotation angle is stored in the angle property. This angle is in degrees and the rotation origin is always considered to be the center of the element. angle can be also accessed or set directly using the regular Backbone set()/get() methods or through the rotate method.

Size of an element is stored in the size property that is an object with width and height keys. Again, size can be accessed or set directly using the regular Backbone set()/get() methods or through the resize method.

Presentation

Another important property is attrs which is an object with keys representing selectors that match subelements and values which are SVG attributes that will be set on the subelements. One can find a list of SVG attributes and their descriptions e.g. on MDN.

It is important to note that each joint.dia.Element defines an SVG markup which is then used by joint.dia.ElementView to render the element to the paper. For instance, the joint.shapes.basic.Rect element (that inherits from joint.dia.Element) defines its markup as follows:

<g class="rotatable"><g class="scalable"><rect/></g><text/></g>

Therefore, in order to set a red fill color for the rectangle subelement, the attrs object should contain:

rect: { fill: 'red' }

Again, it is not recommended to change the attrs object directly. Instead, use the attr method.

The z property specifies the stack order of the element in the SVG DOM. An element with a higher z level is in front of an element with a lower z level. (This also stands for links which have the exact same property.)

Nesting

The last two properties of elements are embeds and parent. These two are related to elements that contain or are contained within other elements forming a hierarchical structure. embeds is a list of cell id's that are embedded inside the element. parent is an id of the parent element of the embedded one. When a parent element is translated, all its children get translated too.

The following list contains events that you can react on:

• change - generic event triggered for any change on the element - fn(element, opt)
• change:position - triggered when the element changes its position - fn(element, newPosition, opt)
• change:angle - triggered when the element gets rotated - fn(element, newAngle, opt)
• change:size - triggered when the element gets resized - fn(element, newSize, opt)
• change:attrs - triggered when the element changes its attributes - fn(element, newAttrs, opt)
• change:embeds - triggered when other cells were embedded into the element - fn(element, newEmbeds, opt)
• change:parent - triggered when the element got embedded into another element - fn(element, newParent, opt)
• change:z - triggered when the element is moved in the z-level (toFront and toBack) - fn(element, newZ, opt)
• transition:start - triggered when a transition starts. - fn(element, pathToAttribute)
• transition:end - triggered when a transiton ends. - fn(element, pathToAttribute)

// Listening for changes of the position to a single element
element1.on('change:position', function(element1, position) {
  alert('element1 moved to ' + position.x + ',' + position.y);
});
// All elements events are also propagated to the graph.
graph.on('change:position', function(element, position) {
  console.log('Element ' + element.id + 'moved to ' + position.x + ',' + position.y);
});
// Using the option parameter and a custom attribute
graph.on('change:custom', function(element, custom, opt) {
  if (opt.consoleOutput) {
    console.log('Custom attribute value changed to "' + custom + '"');
  }
});
element2.prop('custom', 'myValue', { consoleOutput: true });

Ports

Many diagramming applications deal with elements with ports. Ports are usually displayed as circles inside diagram elements and are used not only as "sticky" points for connected links but they also further structure the linking information. It is common that certain elements have lists of input and output ports. A link might then point not to the element as a whole but to a certain port instead.

It's easy to add ports to arbitrary shapes in JointJS. This can be done either by passing a ports definition as an option in the constructor or using the ports API to get/add/remove single or multiple ports. For more information on how to define ports please see Port configuration section.

Port API on joint.dia.Element

• hasPort / hasPorts
• addPort / addPorts
• removePort / removePorts
• getPort / getPorts
• portProp
• getPortPositions

Port configuration

// Single port definition
var port = {
    // id: 'abc', // generated if `id` value is not present
    group: 'a',
    args: {}, // extra arguments for the port layout function, see `layout.Port` section
    label: {
        position: {
            name: 'right',
            args: { y: 6 } // extra arguments for the label layout function, see `layout.PortLabel` section
        },
        markup: '<text class="label-text" fill="blue"/>'
    },
    attrs: { text: { text: 'port1' } },
    markup: '<rect width="16" height="16" x="-8" strokegit ="red" fill="gray"/>'
};

// a.) add a port in constructor.
var rect = new joint.shapes.standard.Rectangle({
    position: { x: 50, y: 50 },
    size: { width: 90, height: 90 },
    ports: {
        groups: {
            'a': {}
        },
        items: [port]
    }
});

// b.) or add a single port using API
rect.addPort(port);

{ position: 'left'}

// or ...
{
    position: {
        name: 'left',
        args: {
            dx: 10
        }
    }
}

    <p>For instance an element with the following markup
<blockquote><pre>`<g class="rotatable">
<g class="scalable"><rect/></g>
<text/>

<g model-id="element1">
    <g class="rotatable">
        <g class="port"></g>         <!-- z: 0 -->
        <g class="scalable"><rect/></g>
        <g class="port"></g>         <!-- z: 1 -->
        <text/>
        <g class="port"></g>         <!-- z: 2 -->
    </g>
</g>

<g model-id="element2">
    <g class="port"></g>         <!-- z: 0 -->
    <circle/>
    <g class="port"></g>         <!-- z: 1 -->
    <g class="port"></g>         <!-- another z: 1 -->
    <text/>
    <g class="port"></g>         <!-- z: 2 -->
    <g class="port"></g>         <!-- z: 'auto' -->
    <g class="port"></g>         <!-- z: 3 -->
    <g class="port"></g>         <!-- z: 'auto' -->
    <g class="port"></g>         <!-- z: 10 -->
</g>

</td>

All properties described above are optional and everything has own default. E.g. element.addPorts([{}, {}]) will add 2 ports with default settings.

Port groups configuration

group attribute comes to play when you're not happy with the default port alignment. It's also handy when you need to define multiple ports with similar properties. group defines defaults for ports belonging to the group. Any group property can be overwritten by a port in this group except the type of layout - position. 'group' defines the layout and port 'args' are the only way how a port can affect it.

   // Define ports and port groups in element constructor.
   var groupA;
   var rect = new joint.shapes.basic.Rect({
        // ...
        ports: {
            groups: {
                'group1': groupA,
                // 'group2': ...,
                // 'group3': ...,
            },
            items: []
        }
    });

    groupA = {
            position: {
                name: 'string', // layout name
                args: {}, // arguments for port layout function, properties depends on type of layout
            },
            label: {
                // ....
            },
            attrs: {},
            markup: '<rect width="10" height="10" stroke="red"/>'
        };

{ position: 'left'}

// or ...
{
    position: {
        name: 'left',
        args: {
            dx: 10
        }
    }
}

Custom markup

Both port and port label can have custom markup.

    var rect = new joint.shapes.basic.Rect({
        // ...
    });

    rect.addPort({ markup: '<rect width="10" height="10" fill="blue"/>' })
    rect.addPort({ markup: '<rect width="15" height="15" fill="red"/>', label: { markup: '<text fill="#000000"/>' }})

or, it can be set as an default port markup/port label markup on an element model:

    var rect = new joint.shapes.basic.Rect({
        portMarkup: '<rect width="20" height="20" fill="black"/>',
        portLabelMarkup: '<text fill="yellow"/>',
        // ...
    });

The view for the joint.dia.Element model. It inherits from joint.dia.CellView and is responsible for:

• Rendering an element inside of a paper
• Handling the element's pointer events
• Provides various methods for working with the element (visually)

To find the view associated with a specific element (model), use the findViewByModel method of the paper.

var elementView = paper.findViewByModel(element);

joint.dia.Graph is the model holding all the cells (elements and links) of the diagram. It's a Backbone model. The collection of all the cells is stored in the property cells.

The graph is a powerful data model behind all JointJS diagrams. It not only provides an efficient storage for directed graphs but also offers useful algorithms for traversing the graphs.

Additionally, the graph accepts an option object in its constructor function that can contain the cellNamespace option. This option can be used to change the default behavior of JointJS which by default reads cell model definitions from the joint.shapes namespace. For example, if a cell is of type 'myshapes.MyElement', then the graph looks up joint.shapes.myshapes.MyElement model when deserializing a graph from the JSON format. If the graph is instantiated as e.g. var graph = new joint.dia.Graph({}, { cellNamespace: myShapesNamespace }), then the graph will read the model definition from the myShapesNamespace.myshapes.MyElement object instead. This is useful in situations where you don't want to - for any reason - use the joint.shapes namespace for defining your own custom shapes. This option is often used in combination with the cellNamespaceView option on the joint.dia.Paper object.

The following list contains events that you can react on:

• change - generic event triggered for any change in the graph
• add - triggered when a new cell is added to the graph
• remove - triggered when a cell is removed from the graph
• Moreover, all the events that are triggered on elements or links are propagated to the graph as well.

graph.on('add', function(cell) {
    alert('New cell with id ' + cell.id + ' added to the graph.')
})

The JointJS graph JSON representation has the following format:

{
    cells: [// Array of cells (ie. links and elements).
        {
            id: '3d90f661-fe5f-45dc-a938-bca137691eeb',// Some randomly generated UUID.
            type: 'basic.Rect',
            attrs: {
                'stroke': '#000'
            },
            position: {
                x: 0,
                y: 50
            },
            angle: 90,
            size: {
                width: 100,
                height: 50
            },
            z: 2,
            embeds: [
                '0c6bf4f1-d5db-4058-9e85-f2d6c74a7a30',
                'cdbfe073-b160-4e8f-a9a0-22853f29cc06'
            ],
            parent: '31f348fe-f5c6-4438-964e-9fc9273c02cb'
            // ... and some other, maybe custom, data properties
        }
    ]
}